Additive manufacturing · Metro Manila

Parts printed
to engineering spec.

Meshed Labs is a local print farm producing functional FDM and resin parts — and routing industrial nylon jobs to partner bureaus — with quoted tolerances, published peso pricing, and no currency-conversion games.

No MOQ Files: STL · STEP · 3MF Nationwide courier 1–1000 parts
What we do

A print farm, not a marketplace

Overseas bureaus quote in dollars and add freight. Hobbyists quote ₱3 a gram with no quality gate. We sit deliberately in between: industrial tolerances, a named material spec, and a peso invoice.

Functional FDM

PLA, PETG, ABS/ASA, TPU and carbon-fibre nylon for brackets, enclosures, jigs and end-use parts that actually get loaded.

Resin detail

MSLA/DLP for fine features and smooth surfaces — miniatures, dental study models, jewellery patterns and display pieces.

DFM review

Every file gets checked for overhangs, thin walls, unsupported spans and trap geometry before it hits a plate — and we tell you before you pay.

Nationwide delivery

Metro Manila same-day courier, Luzon and Visayas next-day, Mindanao in 2–3 days. Shipping quoted at cost, never marked up.

Instant quote

Price it before you talk to us

A live estimate from our published rate card. Runs entirely in your browser — nothing is uploaded and nothing is tracked.

Material
Quick pick

Estimate only. Final price is confirmed against your actual mesh, orientation, support strategy and layer height.

Estimated total
Material₱0
Machine, finishing & QC₱0
Total
—
₱0

Covers material, machine time, support removal, inspection and protective packing. Nationwide courier is quoted separately at cost.

Lock it in with a real quote
Materials

Named polymers,
not “whatever’s in stock”

We hold a fixed inventory and quote from it. If we run out, we say so up front rather than silently substituting and hoping you don’t notice.

  • PLA — crisp detail, low warp. Models, decor, fit checks.
  • PETG — tough and weather-resistant. Outdoor brackets, planters.
  • ABS / ASA — heat and UV stable. Enclosures, automotive trim.
  • TPU 95A — flexible. Grips, bumpers, wearables.
  • Carbon-fibre nylon — stiff, light, production-grade.
  • Industrial nylon PA12 — via partner bureau. No MOQ, fully traceable.
0.08–0.32 mm layer height · up to 300 × 300 × 400 mm
Acceptance criteria
  • Dimensional check on every part against nominal
  • Layer adhesion verified on load-bearing jobs
  • Surface finish agreed up front, not discovered later
  • Failed prints re-run at our cost, never yours
  • Material lot noted on the packing slip
Quality

Told before you buy

Most print failures are decided before the first layer. We review your mesh, flag the real risks — unsupported overhangs, walls under 0.8 mm, snap-fits that will print jammed — and propose an orientation. If your file genuinely can’t be printed well, we’ll say that too, and suggest a different process.

Process

From file to courier in five moves

No account required. No minimum order. No sales call before you’ve seen a price.

Send the file

STL, STEP, 3MF, OBJ. Drag it in and describe the job, or just say what the part needs to do.

Get a real quote

Within one business day — material, orientation, layer height, tolerance, price and delivery date in writing.

DFM review

We flag anything that’ll fail before it fails, and tell you what we’d change to make it hold together.

Print & inspect

Printed, de-supported, finished to spec and dimensionally checked. Photos on request before we ship.

Delivered

Same-day courier in Metro Manila, next-day Luzon and Visayas, 2–3 days Mindanao. Packed to survive the trip.

Who we serve

Where additive actually pays off

Low volume, high value, or impossible to tool. If it’s none of those, we’ll tell you injection moulding is cheaper and stop wasting your time.

Hardware & product

Enclosures, brackets, jigs

Enclosure prototypes, mounting hardware and assembly jigs that replace a ₱200k mould for a run of fifty.

Medical & dental

Anatomical models

Surgical planning models and aligner casts from your scan or STL, printed in biocompatible-grade resin on request.

Architecture & AEC

Scale models & fit-outs

Massing studies, site models and complex organic forms — the kind of geometry modelling can’t hold.

Industrial & maintenance

Obsolete replacement parts

The original supplier discontinued it six years ago. Send us the broken one — we’ll scan and reprint it.

Education & research

Lab models & teaching aids

Department-scale runs on student budgets, with volume breaks from ten pieces upward.

Creators & retail

Minis, props, custom

Display pieces, cosplay props and product samples. Sanded, painted and finished to retail standard.

Questions

Before you ask

Is there a minimum order?
No. One part is a valid order. Volume discounts kick in from ten units on the same model — 10% off at 10–49, 20% at 50–199, 25% at 200–499 and 30% from 500 up.
Why do you quote per gram? What if my part is huge?
Weight is the most honest proxy we have, but it’s not the only cost driver — orientation and support strategy move the price too. For parts over roughly 500 g we’ll send a written quote with the actual slicing breakdown rather than a scaled estimate.
Can you do nylon SLS or metal parts?
We route industrial nylon PA12 jobs to a partner bureau we audit, and manage the whole job for you — one invoice, one point of contact, tracked delivery. Same for DMLS or SLM metal if you need it. You pay our handling, not a second vendor’s mark-up on top of freight.
What files do you accept?
STEP/STP is best because it carries real geometry. 3MF and STL work fine. We also take OBJ, IGES, PRT and SLDPRT. If you only have a photograph, we can scan — send the object or the images and we’ll quote it.
Do you repair meshes and fix bad files?
Yes, basic mesh repair is included: non-manifold edges, holes, inverted normals, self-intersections. It’s free and it’s part of the DFM review. Anything beyond that — remodelling a broken design — is quoted separately.
What if the part arrives and it isn’t right?
Send a photo and the file within 7 days. If it missed the tolerance or finish we agreed, we reprint at our cost. No forms, no arguing about it.
Do you ship outside the Philippines?
We do, but lead times and duties are yours to absorb. We’ll quote it if you ask — just note that for most overseas customers a bureau closer to your market is cheaper once freight is counted.

Send a file. Get a number.

Material, orientation, tolerance, price and delivery date — in writing, within one business day. If we can’t do it well, we’ll tell you who can.