What we can actually print
Honest numbers, including the limits. If your part falls outside them we’ll say so before you order instead of finding out on the delivery date.
Three routes to a finished part
FDM
Layer-extruded thermoplastic. The workhorse — strongest, cheapest, largest build volume. Right choice for anything functional.
- Layer height 0.08 – 0.32 mm
- Build volume 300 × 300 × 400 mm
- Tolerance ±0.15 mm typical
- Standard lead time 24–72 h
MSLA / DLP
UV-cured photopolymer. Far finer resolution and a genuinely smooth surface — no layer lines visible at normal viewing distance.
- Layer height 0.025 – 0.1 mm
- Build volume 220 × 130 × 300 mm
- Tolerance ±0.05 mm typical
- Standard lead time 3–5 days
Nylon PA12 / SLS
Industrial powder-bed printing for production quantities. No layer-line weakness in Z, real mechanical properties, full material traceability.
- Tolerance ±0.1 mm
- Build volume up to 380 × 380 × 420 mm
- No MOQ · 1 to 1,000+ parts
- Managed end-to-end by us
What accuracy you can plan around
| Process | Typical tolerance | Achievable (optimised orientation) | Worst case |
|---|---|---|---|
| FDM | ±0.15 mm | ±0.10 mm | ±0.30 mm |
| FDM — CF Nylon | ±0.15 mm | ±0.10 mm | ±0.30 mm |
| MSLA / DLP Resin | ±0.05 mm | ±0.03 mm | ±0.10 mm |
| SLS PA12 (partner) | ±0.10 mm | ±0.08 mm | ±0.15 mm |
Dimensional accuracy is a property of the part, not just the machine — wall thickness, overhang angle, feature size and material all move it. Send us the model and we’ll tell you what your specific part can hit before you commit.
DFM rules we check every time
Things that print badly
- Walls under 0.8 mm (0.4 mm for resin)
- Overhangs past 45° with no support
- Holes or slots below the extrusion diameter
- Islands and coplanar surfaces that will lift
- Poor part placement causing visible seam lines
Things that are worth redesigning
- Unsupported spans that will droop into the part
- Sharp internal corners — a fillet prints stronger
- Non-manifold meshes and inverted normals
- Zero-clearance snap fits that will fuse shut
- Trapped volumes that will need draining
Basic mesh repair — holes, non-manifold edges, inverted normals, self-intersections — is included at no charge in every order.
Post-processing in house
Depoxy & clean
Supports removed, surfaces degreased, sharp edges lightly broken. Ready to fit.
Sanded smooth
Progressive sanding to 400 grit. Removes most layer texture on FDM parts.
Primed & painted
Two-part epoxy primer, colour coat, clear coat. Retail and display standard.
Resin polished
Multi-stage wet sanding and compound on resin parts. Glass-like surface finish.
Metal inserts
Heat-set threaded inserts pressed into FDM parts so you get real threads in a printed body. Insert cost at cost plus ₱25 fitting fee.
Assembly & kitting
Parts fitted, fasteners torqued, multi-colour assembly and labelled packaging for dropship or retail fulfilment.
Where we say no
We won’t take the job
- Load-bearing structural or safety-critical parts (hoists, load ratings, PPE)
- Food-contact or medical-contact parts without certified materials
- Anything where a failure would injure someone
We’ll refer you on
- Certified biocompatible resin for clinical use
- Metal parts at volume — a real foundry serves you better
- Injection-moulded runs in the thousands — tooling pays for itself
Send the file and find out
Material, orientation, tolerance, price and delivery date in writing within one business day.